Technical Support
Home >> Technical Support
Secondary Vulcanization of Silicone Rubber
Secondary vulcanization, also known as post-vulcanization or Secondary sulfide, refers to the vulcanization of rubber products to a certain degree, remove the heat source to continue the process of heating vulcanization. Widely used in silicone rubber, fluorine rubber and fluorine silicone rubber...
Introduction of Liquid Silicone Rubber Injection Molding Process
Liquid silicone injection molding process is a highly efficient and precise manufacturing technique used in the production of various silicone-based products. This process involves injecting liquid silicone into a mold cavity under high pressure, allowing it to cure and solidify into the desired s...
LSR Molding Process from YEJIA Factory
The structure of the liquid silicone rubber (LSR) injection mold is generally similar to the mold structure used for thermoplastic compounds, but there are many significant differences.For example, LSR compounds generally have a low viscosity, so the filling time is very short, even at very ...
Optical Liquid Silicone Rubber
Optical liquid silicone rubber (LSR) is a highly specialized material that finds its application in the production of optical components. Its high light transmission rate of up to 96% makes it an ideal material for use in automotive headlights that require high-power light sources.
